Extron Electronics SMX System User Guide - Manual (Page 46)

SMX System MultiMatrix Switcher • SIS Configuration and Control 40
X3! = Slot information XYZ
X
= board type (B – Y)
YZ = board size (00 – 15)
(X) Board Type (X) Board Type
B Video N DVI Pro
C S-video O HDMI
D S-video P FOMX 1616
E Wideband Q FOMX 88
F S-video DIN R Reserved
G VGA S Reserved
H VGA T Reserved
I Audio analog U USB
J SDI/HDSDI V Reserved
K Sync W DVI (2 data blocks)
L DVI X No board installed
M DVI Y DVI (2 data blocks)
(YZ) Reference # Board Size Note
15 16x16
09 8x4x2 For S-video BNC
08 8x8x2 For sync and S-video
07 8x8
06 8x4
05 4x8
04 4x4
00
No board installed or slot covered by
multi slot board Refer to next slot for
size of board.
X3@ = EDID reference file for DDC data 15 = default (1024x768 at 60 Hz) for DVI
32 = default (720p) for DVI Pro and HDMI
boards
1 – 8 = stored from connected monitors as
reference
9 – 36 = fixed factory rates
37 – 40 = user assigned
X3# = Primary power supply 0 = not installed
1 = OK
2 = failed
X3$ = Secondary (redundant) power
supply 0 = not installed
1 = OK
2 = failed