Html configuration and control, Html control and configuration, Html configuration – Extron Electronics SMX System User Guide User Manual

Page 93: And control, E, or, Accessing the web pages

Advertising
background image

SMX System MultiMatrix Switcher • HTML Configuration and Control

87

HTML Configuration
and Control

The SMX can be configured and controlled through its Ethernet port, connected through a
LAN or WAN and accessed with a Web browser such as Microsoft Internet Explorer. The
browser displays the factory-installed Web pages, which provide an alternative means of
viewing and controlling the SMX. This section includes:

•

Accessing the Web Pages

•

System Status Pages

•

Configuration Pages

•

File Management Page

•

Control Pages

NOTE: If your Ethernet connection to the SMX is unstable, try turning off the proxy

server in your Web browser. To do this in Microsoft Internet Explorer, click

Tools >

Internet Options > Connections > LAN Settings

, and clear the

Use a proxy

server...

check box. Click

OK.

TIPS:

•

The HTML language reserves certain characters for specific functions. The SMX
does not accept these characters as part of preset names, the switcher name,
passwords, or locally created file names.

•

Unless otherwise specified, the following characters are not recommended or invalid
for SMX inputs:

+ ~ , @ = ‘ [ ] { } < > “ ; : | \ ?

and

space

Accessing the Web Pages

Access the HTML pages as follows:

1.

Start the Web browser program.

2.

Click in the browser

Address

field and enter your SMX IP address (see figure 44).

NOTE: If the local system administrators have not changed the value, the

factory-specified default, 192.168.254.254, is the correct value for this field.

Figure 44.

Internet Explorer Address Field

3.

To view a non-default page instead (such as an uploaded custom page), enter a slash (/)
and the name of the file to open.

NOTES:

•

The browser

Address

field should display the address in the following format:

xxx.xxx.xxx.xxx/optional_file_name.html

.

•

The following characters are invalid or not recommended in the file names:

~ @

= ‘ [ ] { } < > “ ; : | \ ?

and

space

Advertising