Gotham Incito DMX512_RDM Field Rev. F - Manual (Page 11)

Function 4 = Configure behavior on loss of DMX Signal
1 blink = Hold last level forever
2 blinks = Fade to off over 1 second immediately
3 blinks = Hold last level 1 minute, then fade to off over 1 second
4 blinks = Fade to 100% over 1 second immediately
5 blinks = Hold last level 1 minute, then fade to 100% over 1 second
CJ520003 Rev. F
©2012 Acuity Brands Lighting, Inc.
All Rights Reserved.
11 of 12
# of Blinks DMX Profile
DMX
Channels
Channel
Assignment
DMX
Value Opertation
1 blink Linear Dimmer 1 1-Intensity 0...255 0-100%, Relay open at DMX=0
2 blink Linear Dimmer High Resolution 2
1-Intensity (Coarse)
2-Intensity (Fine)
0…255 0-100%, Relay open at DMX=0,0
3 blink Logarithmic Dimmer 1 1-Intensity 0…255 0-100%, Relay open at DMX=0
4 blink Logarithmic Dimmer High Resolution 2
1-Intensity (Coarse)
2-Intensity (Fine)
0…255 0-100%, Relay open at DMX=0,0
5 blink Linear Dimmer + Relay Control 2
1-Intensity
2-Relay
0…255
0-100%, Relay open < 102, Relay close >
152
6 blink Logarithmic Dimmer + Relay Control 2
1-Intensity
2-Relay
0…255
0-100%, Relay open < 102, Relay close >
152
7 blink
Linear Dimmer High Resolution + Relay
Control
3
1-Intensity (Coarse)
2-Intensity (Fine)
3-Relay
0…255
0-100%, Relay open < 102, Relay close >
152
8 blink
Logarithmic Dimmer High Resolution +
Relay Control
3
1-Intensity (Coarse)
2-Intensity (Fine)
3-Relay
0…255
0-100%, Relay open < 102, Relay close >
152
DETAILED FUNCTION TABLE, Cont’d
Function 3 = Configure DMX Channel Footprint/RDM Personality