Imetec PIUMA NEXT CYCLONIC 1300W PARQUET - Manual (Page 23)

EN
15
STORING AND CARING FOR THE PRODUCT
The appliance can be stored in vertical position with the combination brush (6) attached
[FIG. G1].
Attach the combination brush (6) with the bristles in position B (retracted bristles)
to prevent any damage.
TROUBLESHOOTING
PROBLEM SOLUTION
The appliance does not turn
on.
• Ensure that the plug is connected to the socket. Ensure
that the ON/OFF button (11) has been pressed.
The appliance turns off dur-
ing use and does not turn
on again.
• The vacuum cleaner is equipped with a protective motor
thermostat that shuts off the appliance in the event of
overheating! (caused by passageway obstruction or
clogged dust collection system). In the event of its activation,
press the ON/OFF button (11) to turn the appliance off
and let it cool down for a few hours. Remove any dust or
obstructing objects before restarting the appliance.
The vacuum cleaner does
not suction well.
• Electronic power control set to the minimum: Increase
power to Medium or Max.
• The dust collection system is full: empty the dust
compartment.
• The filter is clogged clean or replace the filter.
• The filter is not fastened properly: ensure that the filter is
installed properly.
The dust collection system
is not installed correctly on
the appliance.
• A safety device prevents closing the dust compartment
if the filtering system is missing: ensure that the filtering
system is correctly inserted inside the dust compartment.
The vacuum cleaner
produces odours the
first few times it is used.
• These odours are harmless and disappear shortly
afterwards. Ventilate the room.
MI000889_IT-EN.indd 15 6/6/12 11:00 AM