Xoro HTC 1525D - Manual (Page 61)

17
Engl
ish
DVB-T Mode
Be sure to select the DVB source before operation. Please follow the way to switch into the
DVB-T mode:
1.
Power on the device
2. Press the AV/TV button often until a “DVB” comes on the right top side.
Enter Main Menu
Press the DVB MENU on the remote control to bring
up the main menu on the screen and press it again to
return to the previous menu or return to TV viewing.
Adjust the OSD on screen
1. Press ▲ / ▼ button select each menu.
2. Press ► button and then use ▲ / ▼ / ◄ / ►
button to select and adjust the available
menus.
3. Press DVB MENU or ◄ button to return to
previous menu and press EXIT to return to TV
viewing.
4. Press Enter to confirm your settings
Waiting SIGNAL or NO SERVICE
Here is no signal or no service prompt.
For the first time installation you should start the searching to the TV Programs. Please navi-
gates to Channel Setting and activate the Menu by
pressing Enter button. Choose there the option
“Channel Scan” and confirm by pressing the Enter
button.
Search Type
Press
► and then use ▲ / ▼ to select one of the
search type options: Auto Scan/ Manual Scan/
Scan By NIT. Standard setting is “AUTO Scan”.
Channel No
Input the number directly to select the channel
number, but the range of channel is 0 --- 69. This
option is by “Auto Scan” not active.
Frequency
This function let you know the frequency accordance the channel.
Channel Setting