Kendall Howard 5000-3-40x-xx Performance 400 Series LAN Station - Manual (Page 6)

Step 5. Frame Assembly
On this step you may want to have someone help you with the assembly. Attach the
Lower shelf to left side with (2) 1 ½ Hex Drive Bolts. Next assemble the Right side in
the same way. DO NOT FULLY TIGHTEN YET.
Screw in the (4) Levelers provided into the bottom of the frame (Not shown in the
picture). If you purchased the optional caster kit, you may replace the levelers with the
casters at this point.