Step 6. attach the work surface – Kendall Howard 5000-3-40x-xx Performance 400 Series LAN Station User Manual

Page 7

Text mode
Original mode

Advertising

Step 6. Attach the Work Surface

Stand the bench in its upright position and place the work surface on top of the bench.
Attach work surface with (4) 1 ½ Hex Drive Bolts on each side. You may now tighten
both the Hex Drive Bolts and the cross head screws on both the work surface and the
lower shelf.

Advertising

This manual is related to the following products:

5000-3-30x-xx Performance 300 Series LAN Station 5000-3-20x-xx Performance 200 Series LAN Station 5000-3-10x-xx Performance 100 Series LAN Station