Kendall Howard 5500-3-100-01 Training Table Power/Data Conversion Kit - Manual (Page 2)

Included:
2
Assembly - Step 1:
Assembly - Step 2:
3
Place hook on the bottom of the cap under the front edge of
the power center and slide toward rear.
Tap down on the top of the cap to lock in place on the power
center. To remove the cap, pry up on the back edge of the
cap.
(1) Voice/Data Adapter Kit (1) Power/Data Center
Slide the Power/Data Center
through the grommet. Be sure
the power supply/
communication cable is free to
move up & down with the power
center.
To remove the Power/Data
Center—Slide the Power/Data
Center to its upright position,
squeeze the sides of the power
center close to the grommet
and lift the power center out of
the grommet.
Assembly - Step 3:
Select appropriate adapter plate to fit with your preferred connectors