Gorman-Rupp Pumps PA4A60C-B-E30 575/3 1482736 and up User Manual
Page 8
Advertising
PA SERIES
OM−06440
PAGE A − 3
SAFETY
when required for startup or shutdown
procedures.
Do not remove plates, covers, gauges,
pipe plugs, or fittings from an over-
heated pump. Vapor pressure within the
pump can cause parts being disen-
gaged to be ejected with great force. Al-
low the pump to cool completely before
servicing.
Do not operate the pump without guards
in place over the rotating parts. Ex-
posed rotating parts can catch clothing,
fingers or tools, causing severe injury to
personnel.
Pumps and related equipment must be in-
stalled and operated according to all na-
tional, local and industry standards.
Make sure the pump is level. Lower jack
stands and chock the wheels, if so
equipped.
Advertising
This manual is related to the following products: