Gorman-Rupp Pumps SE1 1/2A3 115V 1P 1483930 and up - Manual (Page 25)

SE SERIES OM−06488
MAINTENANCE AND REPAIR PAGE E − 1
PUMP MAINTENANCE AND REPAIR − SECTION E
MAINTENANCE AND REPAIR OF THE WEARING PARTS OF THE PUMP WILL MAINTAIN PEAK OPER-
ATING PERFORMANCE.
STANDARD PERFORMANCE FOR PUMP MODEL SE1 1/2A3 115V 1P
Based on 70
_F (21_C) clear water at sea level
with minimum suction lift. Since pump installations
are seldom identical, your performance may be dif-
ferent due to such factors as viscosity, specific
gravity, elevation, temperature, and impeller trim.
If your pump serial number is followed by an N",
your pump is NOT a standard production model.
Contact the Gorman-Rupp Company to verify per-
formance or part numbers.
Pump speed and operating condition
points must be within the continuous per-
formance range shown on the curve.