Elmo Rietschle C-DLR 60/100/120/150/250/300/400/500 - Manual (Page 23)

23 www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH |
H K I L L M
1
Maintenance and repair
Fig. 7 Lubrication
H Oil fi lling point
I Oil sight glass
K Oil discharge point
L Grease nipple
M
1
Lubrication plate
Lubrication:
The bearings on the C-DLR 400 / 500 must be lu-
bricated with 30 g of grease every 5,000 operating
hours or after no more than 2 years 30 g Fett (see
the two grease nipples (Fig. 7/L)).
We recommend Klüber PETAMO GY 193 or other
similar greases (see lubrication plate (Fig. 7/M
1
)).
NOTICE
This lubrication interval applies when operating the
machine at an ambient temperature of 20° C. At
40°C this interval is halved.