Canon 220 EX - Manual (Page 27)

27
Fully-Automatic Flash Operation
PILOT
E-TTL H
Make sure that the pilot
lamp is lit. 3 Aim the active focusing
point on the subject and
press the shutter button
halfway.
• Focus is achieved and the shut-
ter speed and aperture settings
are displayed in the viewfinder
and on the LCD panel.
• The sync speed is set automati-
cally anywhere from 1/60 sec. up
to the camera maximum sync
speed and the aperture is set
automatically at the same time.
The camera maximum sync
speed will vary depending on the
camera model. (See page 40.)
4 Check that the , shutter
speed, and aperture set-
tings are displayed in the
viewfinder. Then, press the
shutter button completely
to take the picture.
5
220EX(E) 15-10-2002 07:11 Pagina 27