Canon 220 EX - Manual (Page 33)

33
When you want to control both
the sync speed and the aper-
ture, use manual exposure. Set
the desired aperture and shutter
speed. The TTL autoflash con-
trol system regulates the flash
output according to the aperture
you set for optimum flash expo-
sure.
Flash with Other Modes
3) Automatic Flash with Manual Exposure
M
Set the camera to M
(Manual) and set the
desired aperture and sync
speed anywhere from 30
sec. up to the camera max-
imum sync speed. 1 Press the shutter button
halfway to focus on the
subject.
Check that is displayed
in the viewfinder. Then,
press the shutter button
completely to take the pic-
ture.
2
3
Use of the buLb setting for the sync speed is applicable for flash photog-
raphy with manual exposure
M
220EX(E) 15-10-2002 07:11 Pagina 33