Installation, Board overview – ABUS AZ6301 Terxon PSTN dialer User Manual

Page 38

Advertising
background image

38

•

Display lighting

The back lighting of the display illuminates when the control
panel is touched. If no further entries are made on the panel,
the lighting switches off automatically after 1 minute.

5. Installation

1. Open the cover screws and remove the cover from the base of

the dialer.

Mark the three holes on the wall using the base of the dialer as a
drilling template. Drill the holes.

Feed all connection lines through the rear opening, or use the cable
cut-outs on the top or bottom of the dialer. Attach the dialer to the wall.

6. Board

overview




Advertising