ABUS AZ6301 Terxon PSTN dialer - Manual (Page 61)

61
11. Displays
11.1 Normal mode
Display Explanation
PLEASE
RECORD
If the dialer was put into operation for the first
time, then a factory settings reset is
necessary. The telephone numbers and
messages must then be programmed.
SD1 This is the display in standby mode. The
display appears as soon as at least one
telephone number
and one voice message are programmed. It
also appears during an alarm call.
ABORTED The alarm call was cancelled by the user
during the transmission attempt by the dialer.
11.2 Test mode
Display Explanation
RINGING The device has recognised a dial tone.
ENGAGED
The recipient line is engaged. The dialer
makes a new connection attempt.
UNOBTAIN
Message transmission could not be made.
SENT OK The alarm was transmitted successfully and
acknowledged by the recipient.
NO REPLY
The alarm call was not answered or not
acknowledged by the recipient.