ABUS FU8380 Secvest 2WAY Wireless Seismic Detector - Manual (Page 14)

14
Introduction
The FU8380 wireless vibration detector
triggers an alarm when vibrations caused
typically by attempted break-ins occur
(glass breakage, drilling, sawing, levering).
An individual vibration sensor analyses
these vibrations. The detector sends a
signal to the alarm centre depending on the
preset sensitivity. Both fixed and moveable
objects, plus windows and doors can be
monitored with this detector.
Safety information
Battery warning!
The device is supplied with direct current
from a 3 V lithium battery. To guarantee a
long working life and avoid fire and injury,
please note the following:
Do not dispose of the battery in
domestic waste.
The battery must not be directly
exposed to heat or sunlight, and
must not be stored in a place with
a very high temperature.
The battery must not be burned.
The battery must not come into
contact with water.