ABUS TVIP10055B - Manual (Page 27)

27
A secure wireless connection is set up in the network camera and access point
through the assignment of a PIN. Press the “Generate new PIN” button to assign a
new random PIN. This PIN must then be made known in the access point (WPS
settings). Press “Start”. The network camera and access point are then
automatically connected to each other via a secure connection.
Connect:
A connection is established via WPS with the selected procedure (PBC or PIN).
Disconnect: The connection is disconnected.
Update: The list of available access points supporting WPS is updated.
6.5 Security
User
This menu item describes the user administration of the network camera. Up to 10 user accounts can be
defined. The user accounts can each have one of three user types.
User list:
Shows all configured users with the corresponding authorization levels.
Add:
Add a user account.
Edit: Edit an existing user account. Before doing this, you need to select the required user account
from the list.
Delete: Delete a user account.
User types Permissions
Administrator Full access, including live views, configuration
Operator Live view
Viewer Live view
The default access data for the main administrator is as follows:
User name: “admin”
Password: “12345”
User name:
Here you assign the user name that needs to be entered for access to the
camera.
Password: Here you assign the user name that needs to be entered for access to the
camera.
Repeat entry: Here you assign the password that the corresponding user needs to enter for
access to the camera.
User type: Select an individual user type for the user ID.
Anonymous setting:
Activated Anonymous setting allows any user to see the main page including
video stream. All settings pages are still password protected.
Accept the settings by pressing “SAVE” or cancel them by pressing “Cancel”.