ABUS TVIP10055B User Manual
Page 8
8
3. Installation
Make sure that all accessories and parts listed above are present in the scope of delivery. An Ethernet cable
is required for camera operation. This Ethernet cable must meet UTP Category 5 (CAT 5) specifications and
must not be longer than 100 metres.
3.1 Power supply
Before starting installation, ensure that the mains voltage and the rated voltage on the power supply unit are
identical. The camera’s supply voltage is 5 VDC. Please use the supplied power supply
3.2 Installing the camera
With the camera a mounting bracket is supplied. At the backside of the camera a socket is located. Using this
socket the camera mounting bracket can be fixed at the camera. The mounting bracket can be fixed at the
wall unsing the supplied pegs and screws.
4. Camera description
4.1 Description of connectors
Front side
Back side
1 Lens
2 Microphone
3 Status
LED
4 Network
connector
5
Power supply connector 5 VDC
6
WPS Status LED (only TVIP10055B)
7
WPS button (only TVIP10055B)
8 Reset
button
9
Socket for camera bracket (1/4 inch
thread)
a
Product sticker (with model number and
MAC
address)
1
2
3
4
5
6
7
8
9
a