ABUS TVVR41210 Operating instructions - Manual (Page 62)

System operation
62
System operation
General information
The device can be controlled as follows:

Using the USB mouse
Connections on the rear of the device
Note
Pay attention to the overview on page 61.
Name
Function
VIDEO IN:

BNC input for analogue cameras
VIDEO OUT:

Spot output
LOOP OUT:

Each camera input is looped here and output
again
VGA:

VGA monitor connection (9-pin), video output
signal
AUDIO IN:

Cinch inputs
POWER ON/OFF:
On and off device switch
ALARM IN/OUT:

Max. 16 alarm inputs, max. 4 relay outputs
12 V DC

12 V DC connection for power supply
RS-485

Connection for PTZ cameras
LAN

RJ45 port for a network connection
AUDIO OUT:

Cinch audio output (synchronised with the
video output)
HDMI

HDMI monitor connection
USB

Connection for USB devices
SHUTTLE KNOB

For selecting the operating mode