ABUS TVVR41210 Operating instructions - Manual (Page 93)

Camera
93
2. Select whether the settings should be applied to all
days of the week with using Copy.
3. Confirm the settings by clicking Apply and leave the
menu with OK.
Handling
Click on the TAB Handling.
Here you can configure the behavior of the recorder dur-
ing a detected event (for example: motion got detected)
by clicking the respective check box.
Parameter Notification
Full Screen Monitoring The camera is displayed as
a full-screen picture in live
cast
Audible Warning The device emits a repeat-
ing tone
Notify CMS Sends an alarm signal to a
PC with ABUS CMS soft-
ware. The software must be
enabled and the recorder set
to surveillance mode on the
PC.
Send E-Mail An e-mail is sent to a specif-
ic e-mail address.
Trigger alarm output See Settings for alarms

Confirm the settings by clicking Apply and leave the
menu with OK
Private Zone
Select the camera channel under “Camera”.
Select the checkbox for activating the private zone.
1. Select up to four private zones with the mouse.
2. Select Copy if the setting is to be applied for all
cameras.
3. Confirm the settings by clicking Apply and exit the
menu with OK.
Note
You can define up to 8 time periods (each from
00:00 to 00:00). The times in the individual peri-
ods must not overlap.