Alpha Technologies Radium MiniBay - Manual (Page 27)

27 044-001-C0-00, Rev. C
2.0 DC Air Conditioner, continued
2.4 Air Conditioner Installation and Removal
Allow 20 minutes for completion of procedure.
Tools required: 7/16" deep-well socket and ratchet handle
Removal:
1. Disconnect power to the air conditioner.
2. Disconnect input and alarm wires from the control board (see Fig. 2-2).
3. From the inside of the door, remove the 5 bolts (labeled S below) holding the shroud to
the door. Remove the shroud. Remove grounding lug.
4. While another installer supports the air conditioner on the outside of the door, remove the
10 remaining bolts (labeled A below). Remove the air conditioner.
5. Reverse order for installation. Replace PORON washers if they are damaged (Alpha P/N
684-020-10).
Fig. 2-4, Shroud and Air Conditioner Bolts
–
S
S S
S S
–
A A
A A
A A
A A
A A