Alpha Technologies 32-0-10A Fuse Panel - Manual (Page 10)

A RGUS T ECHNOLOGIES 32-0-10A F USE P ANEL
020-103-C0 R EV B P AGE 2 of 6
2 I
NSPECTION
2.1 Packing Materials
All Argus products are shipped in rugged, double-walled boxes and suspended via
solid polyurethane foam inserts to minimize shock that may occur during transporta-
tion. Packaging assemblies and methods are tested to National Safe Transit Associa-
tion standards.
Products are also packaged with Cortex. This plastic wrap contains a corrosive in-
hibitor that protects the system from corrosion for up to two years.
2.1.1 Returns for Service
Save the original shipping container. If the unit needs to be returned for service, it
should be packaged in its original shipping container. If the original container is un-
available, make sure the unit is packed with at least three inches of shock-absorbing
material to prevent shipping damage. Argus Technologies is not responsible for
damage caused by the improper packaging of returned units.
2.2 Check for Damage
Prior to unpacking the equipment, note any damage to the shipping container. Un-
pack the equipment and inspect the exterior for damage. If any damage is observed
contact the carrier immediately.
Continue the inspection for any internal damage. In the unlikely event of internal
damage please inform the carrier and contact Argus Technologies for advice on the
impact of any damage.
STOP HERE
Verify that you have all the necessary parts per your
order for the proper assembly of your system.