3 inspection, 1 packing materials, 1 returns for service – Alpha Technologies CXPS 48-1.2-225 48 Vdc User Manual

Page 21: 2 check for damage, 3 general receipt of shipment, 1 racks, 2 rectifiers (purchased separately), 3 miscellaneous small parts, 4 batteries (purchased separately), Nspection

Advertising
background image

053-691-B1 Rev E

Page 13 of 33

3 Inspection

3.1 Packing materials

All Alpha products are shipped in rugged, double-walled boxes and are suspended via solid inserts to minimize

shock that may occur during transportation. Packaging assemblies and methods are tested to International Safe

Transit Association standards. Power systems are custom packaged in heavy-duty plywood crates.
Products are also packaged with a plastic wrap that contains a corrosive-inhibitor that protects the product from

corrosion for up to two years.
Rectifiers and batteries are shipped on individual pallets and are packaged according to the manufacturer’s

guidelines.

3.1.1 Returns for service

Save the original shipping container. If the product needs to be returned for service, pack the unit in its original

shipping container. If the original container is unavailable, make sure that the product is packed with at least three

inches of shock-absorbing material to prevent shipping damage.
Alpha Technologies is not responsible for damage caused by the improper packaging of returned products.

3.2 Check for damage

Before unpacking the product, note any damage to the shipping container. Unpack the product and then inspect

the exterior for damage. Contact the carrier immediately if you see any damage.
Continue the inspection by checking for internal damage. In the unlikely event of internal damage, inform the

carrier and contact Alpha Technologies for advice on the impact of any damage.

3.3 General receipt of shipment

3.3.1 Racks

Consult the packing slip to verify that you have the correct number of racks that you ordered.

3.3.2 Rectifiers (purchased separately)

Consult the packing slip to verify that you have the correct number of rectifiers that you ordered.

3.3.3 Miscellaneous small parts

Review the packing slip to determine the part number of the “configuration kits” included with your system; e.g.,

053-691-20-040 for CXPS 48-1.2-225 system installed in 7' Z4 23" rack with 2x battery trays.

3.3.4 Batteries (purchased separately)

Refer to packing list to verify that you have the correct number of batteries.

Verify that you have all the necessary parts for proper assembly.


Call Alpha Technologies if you have any questions before you proceed: 1-888-462-7487

Advertising