Alpha Technologies UPE-8 User Manual
Page 28
Advertising
2. Installation
28
031-165-C0-001 Rev. A
Tools Needed:
Phillips Screwdriver
Procedure:
1.
When using an XM Series 2 power supply, rails may be installed to
aid ventilation.
The rails are held into place with 5 screws (each). Ensure that the screws are on
the OUTSIDE of the rail, as shown below.
2.
Place the power supply on the top tray, ensure that the feet are OUTSIDE the
rails and the power supply rests level.
2.5
XM Series 2 Power Supply Placement
Mounting
Screws
Advertising
This manual is related to the following products: