American Expedition Vehicles JK DualSport XT Suspension 2.5 - Manual (Page 3)

2
REAR SUSPENSION
1.
A. Raise Jeep and support the frame using jack stands or a hoist, such that the rear axle can be
lowered enough to remove the springs. Support the axle by placing floor jack under the center
of the axle. Remove the wheels.
B. Loosen but DO NOT remove all 8 control arm bolts.
C. Remove the track bar. (NOTE: Right hand drive vehicles will reuse the factory track bar)
A.
A.
B. B.
A.
C.