American Expedition Vehicles JK DualSport XT Suspension 2.5 User Manual
Page 6
Advertising
5
6.
Install new shocks at upper mount. Raise axle slowly and guide springs into position.
Re-install swaybar end links and tighten to 60 ft lbs (refer to step 2C.) Re-install lower shock nut
and bolt, tighten to 56 ft lbs (refer to step 2B.) Install brake line drop brackets as shown below,
tighten to 8 ft lbs. Reinstall wheels and tighten lug nuts, working in a star pattern, to 105 ft lbs.
5.
Install new Bump Stop Spacers on axle as shown using the supplied hardware. DO NOT
reverse the orientation from what is shown.
Advertising