Connection – Xoro HTC 2228D User Manual
Page 78
18
HTC 2228D
Eng
lish
Connection
Power connection
Connect the power cable with the wall mounted power outlet.
On the front side you can see a red LED light. The TV set is now in Stand-By mode. By pressing the
POWER button on the remote control or on the top side of the device the red LED changes to a green
light.
Antenna
The HTC TV set has an analogue and a digital TV Tuner inside. For receiving
analogue TV signals please connect the antenna cable with the RF connector
on the HTC TV set and with the VHF/UHF roof antenna or with a CATV an-
tenna plug.
For receiving digital terrestrial TV signals please connect the HTC TV set with
the RF plug and also with the roof antenna. If no roof antenna is available,
please use indoor aerial.
For activating the analogue TV Tuner, please switch with the
SOURCE button
and choose in the popup window „ATV“ or “DTV“ for digital terrestrial TV.
Note:
For getting the best DVB-T reception please uses the roof antenna. If not possible, than you can
connect the HTC TV set with an active indoor aerial.
SCART Input
Audio– and Video signals from a VCR or a setop box can be trans-
mitted by SCART. Please connect a SCART cable with the SCART
input on the HTC TV set and with the SCART output on the VCR or
setop box.
Press the
SOURCE button and choose „SCART“ in the popup win-
dow and the SCART interface is activated.
HDMI
If you want connect a multimedia device with HDMI like a game
console „PS3“ or a Setop box with the HTC TV set, you can estab-
lish a HDMI connection. Please connect the HDMI cable on the
HDMI interface on the HTC TV set and the HDMI output of the mul-
timedia device.
You can also connect the TV set to you personal computer by
Please press the
SOURCE button and choose „HDMI“ in the popup
window and the HDMI input is active.
HDMI cable. Here you can uses the Full-HD resolution (1366 x 768).