Xoro HTC 2228D - Manual (Page 80)

20 HTC 2228D
Engl
ish
Connection
VGA
You can use the HTC TV set as a PC monitor by using the VGA inter-
face. Please connect a VGA cable with the VGA input of the HTC TV
set and with the PC.
With this kind of connection only video signals are transmitted. For
listening sound on the TV you should establish also a sound connec-
tion. Please connect the white and red wire of the 2-pin component
cable with the AUDIO OUT (source) and the stereo jack with the “PC
AUDIO” plug of the HTC TV set.
Please press the SOURCE button and choose „VGA“ in the popup
window. The VGA input is active.
Notes:
1.
Before you connect the HTC TV set with the PC, please
change the graphic resolution of the PC to: 640 x 480, 800 x
600 or 1024 x 768.
2. Please establish the connection and switch to „PC-VGA“ input.
3. For displaying the best results, please uses the native resolu-
tion with HDMI connection of the TV LCD panel:
•
HTC 2228D —> 1 366 x 768 Pixel (60Hz)
DVD-Player, USB Port and Card Reader
The Slot-In DVD-Player, USB port and the Card Reader are on the right side of the device. This USB
port and the Card Reader are part of the DVD-Player and works only in DVD Mode.
Headphone
You can connect a headphone to the TV set. Please uses a
headphone with 3.5 mm phone jack and plug them to the head-
phone port on the left side of the HTC 2228D.
USB
SD/MMC/MS
MIRROR SIDE
REAR SIDE