Recorder – Xoro HTC 2228D User Manual
Page 90
30
HTC 2228D
Engl
ish
Recorder
Recording program
After you setup the settings on the PVR File System menu, you can record a DTV program on the
external USB device. Select the desired program then press the REC button on the remote control
to start recording and the progress bar will be displayed. During recording, the progress bar will fade
out in 10 seconds.
Press the REC button again, an REC icon will blink on the bottom right corner of the screen and it
will fade out in 10 seconds. Recording stops when you press the STOP button and the recorded file
is stored in the external USB device automatically. Press the PLAY button to start to play the file
fresh recorded.
Recording in standby mode
This unit is able to do recording while in sleep mode.
•
Start a recording, then press the power button.
•
While recording in standby mode, unit will not output any picture or sound. The power indica-
tor will flash in green and red consecutively while there is a recording in standby mode.
Schedule Recording by EPG
Schedule record is a function which allows you to
record future program. You can first set up a sched-
ule record, then unit will record the program when
the program is broadcast. It will stop recording when
the program finish.
1. Press
the
EPG button to display Electronic
Program Guide menu.
2.
Select your desired TV program and press the
REC button to enter the Recorder menu.
3.
From here you can modify the start and end
date time of your record schedule by using the
◄► direction button once.
4. Use
the
▲▼ direction button to select date/
time to change.
5. Use
the
▲▼ button to select desired item and
press the OK button to enter.
6.
After setting, press the OK button to confirm
and the Recorded Schedule List will display.
The scheduled program will be recorded auto-
matically at the time you set. You can sched-
ule more recordings and the scheduled pro-
grams will be listed in the Recorded Schedule
List. While in Recorder menu, you can also
press the green button to enter the Recorded
Schedule List.
7. Press
the
▲▼ button to select desired title
and press the red button to delete it.
8. Press
the
EXIT button to exit.