Atec Agilent-85133F - Manual (Page 120)

124 Installation and User’s Guide
C RF Subsystem Functional Verification Test
Understanding the RF Subsystem Functional Verification Test
Use the procedure provided in “Performing the RF Subsystem Functional
Verification Test ” to manually confirm the functionality of the
Agilent E8364B PNA Series vector network analyzer system. This
procedure does not verify performance to specification. This procedure
confirms that the network analyzer is ready for performance verification
and/or operation by confirming the following hardware functionality:
• the repeatability of the RF switch in the test set
• the attenuation range of the test port attenuators
Required Tools
• Agilent E8364B PNA Series vector network analyzer
• Test port cable
• a standard short from the network analyzer calibration kit