Atec Anritsu-MS4640B - Manual (Page 43)

VectorStar™ MS4640B Series Mechanical Calibration Kits
MS4640B Series TDS PN: 11410-00611 Rev. A 43
V (1.85 mm) Calibration Kit, 3654D Series
3654D cal kit provides 50 Ω calibrations for V devices. 3654D-1 cal kit includes Sliding Loads.
3654D Cal Kit contains: Additional Information (typical) Quantity Part Number
Termination V (male) Return Loss:
> 40 dB (F ≤ 20 GHz); > 35 dB (F ≤ 40 GHz)
> 32 dB (F ≤ 67 GHz); > 28 dB (F ≤ 70 GHz)
2 28V50D
Termination V (female) 2 28VF50D
Open V (male) Offset: 4.75 mm 1 24V50C
Open V (female) Offset: 4.75 mm 1 24VF50C
Short V (male) Offset: 5.1 mm 1 23V50C
Short V (female) Offset: 5.1 mm 1 23VF50C
Adapter, V (male) to V (male) 1 33VV50C
Adapter, V (female) to V (female) 2 33VFVF50C
Adapter, V (male) to V (female) 2 33VVF50C
Torque Wrench 5/16 in, 0.9 N·m (8 lbf·in) 1 01-201
Wrench, Universal For SMA, 3.5 mm, 2.4 mm, K, and V Connectors 1 01-204
Pin Depth Gauge 1 01-322
Adapter (female) for Pin Gauge 1 01-323
Reference Flat 1 01-210
Connector Thumb Wheel 4 A18311
Coefficients for standards
Provided on a USB memory device and
3.5 in floppy disk
1 –
3654D-1 Cal Kit adds: Additional Information (typical) Quantity Part Number
Sliding Termination V (male) 1 17V50C
Sliding Termination V (female) 1 17VF50C
Flush Short (male) 1 01-312
Flush Short (female) 1 01-311
3654D Series, V (1.85 mm) Calibration Kit