Atec Anritsu-MS4640B - Manual (Page 45)

VectorStar™ MS4640B Series Verification Kits
MS4640B Series TDS PN: 11410-00611 Rev. A 45
Verification Kits
Verification kits include characterized traceable standards (two attenuators, an airline, and a stepped impedance airline Beatty Standard) that
can be used with the provided Performance Verification Software (PVS) and data to verify the calibration and resulting performance of your VNA.
The applicable calibrations are Short-Open-Load-Through (SOLT) with and without Sliding Loads for the 3666-1, 3668-1, and 3669B-1
Verification Kits. The verification kits are used with the 365x and 365x-1 Cal Kits, and 36585x Series AutoCal, male-female version. Cal Kits and
AutoCal are purchased separately. These verification kits are dedicated for the MS4640B Series VNAs, and are not for older VNAs.
Verification is also provided as a service, eliminating the investment in kits.
VectorStar MS4640B VNA Verification Kits
3666-1 SMA/3.5 mm Connector Verification Kit
3668-1 K Connector Verification Kit
3669B-1 V Connector Verification Kit
Precision Adapters, Attenuators, and Other Components
Anritsu carries a complete line of precision adapters and attenuators. For more information, please visit our web site at www.anritsu.com.
366X-X Verification Kit Precision Adapters, Attenuators, and More