Atec Agilent-E3630 Series - Manual (Page 2)

2
Reliable Power,
Repeatable Results
• Single and triple output
• 80 W to 200 W output power
• Dual range output
(except E3631A)
• Low noise and excellent
regulation
• Remote sensing
(except E3631A)
• Front and rear output
terminals
(E3633A/34A only)
• GPIB and RS-232 standard
• Save and recall functions
• Overvoltage protection,
Overcurrent protection
(except E3631A)
Clean and stable power
with programmability at an
affordable price
Affordable programmable power
supplies to meet your needs
The E363xA Series of programmable
DC power supplies gives you the
performance of the system power
supplies at a decent price. All models
provide clean power, excellent regula-
tion and a fast transient response with
built-in GPIB and RS-232 interfaces.
The E363xA Series is designed to
meet the requirements of the most
demanding applications in R&D design
verifications, production testing, and
QA verifications with traditional quality
and reliability which you can count on.
Excellent performance you can trust
With the 0.01% load and line
regulation, the E363xA Series can
maintain a steady output when power
line and load changes occur. The
power supplies specify both normal
mode voltage/current noise and
common mode current noise. The
low normal mode noise specification
assures clean power for precision
circuitry applications, and the low
common mode current provides isola-
tion from power line current injection.
Remote Interface
If you have an IEEE-488 card or
RS-232 in a PC, these power supplies
will work for you. Every model comes
equipped with both GPIB and RS-232
as standard. All programming is done
in easy-to-use SCPI (Standard Com-
mands for Programmable Instruments).
The user’s guide describes the process
for the first-time programmers.
Front Panel Operation
A knob and self-guiding keypads allow
you to set the output at your desired
resolution quickly and easily. You
can store and recall for up to three
complete setups using the internal
non-volatile memory. The output on/
off button sets the output to zero.
E3631A triple-output power supply
This famous 80-watt triple output
supply offers three independent
outputs: 0 to 6 V/5A, 0 to +25V/1A
and 0 to –25V/1A. The 6 V output is
electrically isolated from the ±25 V
supply to minimize any interference
between circuits under test. The ±25 V
outputs can be set to track each other.
E3632A/33A/34A single-output
dual range power supplies
These single output power supplies
give you the flexibility to select from
a dual output range. The output load
is protected against overvoltage
and overcurrent, which are easily
monitored and adjusted from the front
panel and remote interface. Remote
sensing is available to eliminate the
errors caused by voltage drops on
the load leads. The E3633A/34A offer
front and rear output terminals for
easy wiring.