Atec Agilent-E3630 Series - Manual (Page 3)

3
Model Number
E3631A
E3632A E3633A E3634A
1 2 3
DC Output
Rating (0 ºC to 40 ºC)
0 to +6 V,
0 to 5 A
0 to +25 V,
0 to 1 A
0 to –25 V,
0 to 1 A
0 to 15 V/7 A or
0 to 30 V/4 A
0 to 8 V/20 A or
0 to 20 V/10 A
0 to 25 V/7 A or
0 to 50 V/ 4 A
Load Regulation
± (% of output + offset)
< 0.01% + 2 mV
< 0.01% + 250 μA
Line Regulation
± (% of output + offset)
< 0.01% + 2 mV
< 0.01% + 250 μA
Ripple and Noise (20 Hz to 20 MHz)
Normal Mode Voltage
< 350 μVrms/2 mVpp < 350 μVrms/3
mVpp
< 500 μVrms/ 3 mVpp
Normal Mode Current < 2 mArms < 500 μArms < 2 mArms
Common Mode Current < 1.5 μArms
Accuracy 1 12 Months (25 ºC + 5 ºC), ± (% output + offset)
Programming
Voltage
0.1% + 5 mV 0.05% + 20 mV 0.05% + 10 mV
Current 0.2% + 10 mA 0.15% + 4 mA 0.2% + 10 mA
Readback 2
Voltage 0.1% + 5 mV 0.05% + 10 mV 0.05% + 5 mV
Current 0.2% + 10 mA 0.15% + 4 mA 0.15% + 5 mA
Resolution
Program
0.5 mV/0.5 mA 1.5 mV/0.1 mA 1 mV/0.5 mA 1 mV/1 mA 3 mV/0.5 mA
Readback 0.5 mV/0.5 mA 1.5 mV/0.1 mA 0.5 mV/0.1 mA 0.5 mV/1 mA 1.5 mV/0.5 mA
Meter 1 mV/1 mA 10 mV/1 mA 1 mV/1 mA 1 mV/1 mA (< 10A), 10 mA (¡ 10 A)
Transient Response Less than 50 μsec for output to recover to within 15 mV following a change in output current from full load to half load
or vice versa
Command Processing
Time 3
< 50 msec < 100 msec
OVP/OCP
Accuracy
± (% output + offset)
N/A 0.5% + 0.5 V/0.5% + 0.5 A
Activation Time N/A 1.5 msec, OVP ¡ 3 V/< 10 msec, OVP < 3 V and OCP <10 msec
Temperature Coefficient per ºC (% output + offset)
Voltage
0.01% + 2 mV 0.01% + 3 mV
Current 0.02% + 3 mA 0.02% + 0.5 mA 0.02% + 3 mA
Stability, constant load & temperature ± (% of output + offset), 8 hrs
Voltage
0.03% + 1 mV 0.02% + 2 mV 0.02% + 1 mV
Current 0.1% + 3 mA 0.05% + 1 mA 0.1% + 1 mA
Remote Sense (max.
voltage in each load lead)
N/A 1 V 0.7 V
Voltage Programming Speed, to within 1% of total excursion
Up Full Load
11 msec 50 msec 50 msec 95 msec 80 msec
No Load 10 msec 20 msec 20 msec 45 msec 100 msec
Down Full Load 13 msec 45 msec 45 msec 30 msec 30 msec
No Load 200 msec 400 msec 400 msec 450 msec 450 msec
E3631A/32A/33A/34A Programmable DC Power Supply Specifications
1 Accuracy specifications are valid after a 1-hour warm-up and calibration at 25 ºC.
2 Accuracy refers to readback over GPIB and RS-232 or front panel with respect to actual output.
3 Maximum time for output to change after receipt of commands.