Atec Agilent-E8251A - Manual (Page 3)

3
Sweep range
Frequency sweep Within instrument frequency range
Amplitude sweep Within attenuator hold range
Dwell time 1 ms to 60 s
Frequency settling time 28 ms typical
Amplitude settling time 10 ms typical
Number of points 2 to 1601
Triggering Auto, external, single, or GPIB
Output
Power 4 (dBm)
Frequency range Standard Option 1EA
20 GHz Models
250 kHz to 3.2 GHz
–20 to +13 –20 to +16
> 3.2 to 20 GHz –20 to +13 –20 to +20
40 GHz Models
250 kHz to 3.2 GHz
–20 to +9 –20 to +15
> 3.2 to 20 GHz –20 to +9 –20 to +18
> 20 to 40 GHz –20 to +9 –20 to +14
20 GHz Models with option 1E1
250 kHz to 3.2 GHz
–135 to +11 –135 to +15
> 3.2 to 20 GHz –135 to +11 –135 to +18
40GHz Models with option 1E1
250 kHz to 3.2 GHz
–135 to +7 –135 to +14
> 3.2 to 20 GHz –135 to +7 –135 to +16
> 20 to 40 GHz –135 to +7 –135 to +12
Option 1E1 step attenuator 0 dB and 5 to 115 dB in 10 dB steps
Attenuator hold range
(Same as max power sweep range)
Minimum From –20 dBm to maximum specified output power.
Can be offset using Option 1E1 attenuator.
Amplitude switching speed 5
CW or analog modulation < 25 ms, typical
When using power search < 25 ms, typical
CW level accuracy 6 (dB)
Frequency > +10 dBm +10 to –10 dBm –10 to –20 dBm
250 kHz to 2 GHz ±0.6 ±0.6 ±1.4
2 GHz to 20 GHz ±0.8 ±0.8 ±1.2
> 20 to 40 GHz ±1.0 ±0.9 ±1.3
4 Maximum power specification is warranted from
15 to 35ºC, and is typical from 0 to 15ºC. Maximum
power over the 35 to 55ºC range typically degrades
less than 2 dB.
5 To within 0.1 dB of final amplitude within one
attenuator range
6 Specifications apply over the 15 to 35ºC temperature
range. Degradation outside this range, for power levels
> -10 dBm, is typically < 0.3 dB.
For instruments with type-N connectors (Option 1ED),
specifications are degraded typically 0.2 dB above
18 GHz.
L and A Series