Atec Fluke-430 Series - Manual (Page 4)

Automatic transient display
Every time an event or voltage distortion is
detected, the instrument triggers and automati-
cally stores voltage and current waveforms on all
three phases and neutral. The analyzer will also
trigger when a certain current level is exceeded.
Up to 40 dips, swells, interruptions and tran-
sients can be captured this way. You can see
voltage transients as high as 6 kV and as fast as
5 microseconds.
System-Monitor: Summary screen of
overall power quality health
A single push of the MONITOR button delivers
a dashboard display of rms voltage, harmon-
ics, flicker, interruptions, rapid voltage changes,
swells, unbalance, frequency and mains signal-
ing. The dashboard is updated live, showing
compliance of each parameter to EN50160 limits
or your own limits. Color-coded bars clearly
show which parameters are inside (pass) or
outside limits (fail). During a monitor session,
you can easily drill down to more detail of any
parameter to view and capture its trend for a
report.
Extensive data analysis possibilities
The Fluke 430 Series provides three ways
to analyze measurements. Cursors and zoom
tools can be used ‘live’ while taking measure-
ments, or ‘off line’ on stored measurement data.
Additionally, the stored measurements can be
transferred to a PC with the included software
to perform custom analysis and create reports.
Measurement data can also be exported to com-
mon spreadsheet programs. Store up to 10 mea-
surement datasets and up to 50 screen captures
for use in reports.
The System-Monitor over-
view screen gives instant
insight into whether the
voltage, harmonics, flicker,
frequency and the number of
dips and swells fall outside
the set limits.
A detailed list is given of all
events falling outside the set
limits. By scrolling through
the events list and selecting
an event, the event can be
analyzed in detail.
4 Fluke Corporation Fluke 430 Series Three-Phase Power Quality Analyzers
Perform custom analysis and
create reports with included
software. Measurement data
can also be exported to com-
mon spreadsheet programs.