Atec Kepco-BOP-1 Series - Manual (Page 3)

YOU CAN MODEL MANY
REAL-WORLD PHENOMENA IN WHICH
POLARITY OR DIRECTION IS AN ISSUE
RIGHT/LEFT UP/DOWN HOT/COLD
CLOCKWISE/COUNTERCLOCKWISE
CHARGE/DISCHARGE FORWARD/REVERSE
APPLICATIONS FOR KEPCO’S
BOP 1KW
Automotive
Battery and Motor
Simulation and Testing
Wafer Deposition
and Electroplating
Magnet Applications
Particle Beam Correctors and Injectors,
Medical Imaging, etc.
Solar Panel Research and Testing
BOP 1KW FEATURES
KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11355 USA
Tel: (718) 461-7000 • Fax: (718) 767-1102
Email: [email protected] • www.kepcopower.com
BOP 1KW PHYSICAL CHARACTERISTICS
SPECIFICATIONS RATING/DESCRIPTION CONDITION
Dimensions 5.25" x 19" x 21.5"
H x W x D
English
133.3 x 482.6 x 546.1 mm metric
Weight 53 lbs English
24.1kg metric
* BOP 6-125MG and BOP 10-75MG only.
BOP 1KW INPUT CHARACTERISTICS
SPECIFICATIONS RATING/DESCRIPTION CONDITION
a-c Voltage 230V a-c
Single phase
nominal
176-264V a-c range
Current 9.5A (7.5A)* Maximum 176V a-c
6.4A (4.4A)* Maximum 264V a-c
Frequency
Power
Factor
Efficiency 65% (56%)* Minimum
when sourcing
Active PFC for
source and sink
50/60 Hz
47-63 Hz
0.99
0.97
Nominal output power
Complies with
EN 61000-3-2
nominal
range
source
sink
Switching Frequency 70 KHz ±5%
(50KHz ±5%)*
BOP 1KW PROGRAMMING /DISPLAY CHARACTERISTICS
SPECIFICATIONS RATING/DESCRIPTION CONDITION
Full range output
0 .5 % to 100%
of nominal range
Direct entry
SCPI
Used for series
and parallel
configurations
Analog
Control -10V to +10V voltage or current
main channel
+ 0.05 V to +10V voltage and current
protection limit channel
Digital
Control
Display
Panel-mounted keypad
IEEE 488-2 (GPIB)
RS 232
RS 485 (BITBUS)
4" backlit LCD displays
all functions
All parameters read back on
RS 232 and GPIB buses
local
remote
remote
remote
front panel
remote
+
–
+
–
BOP 1KW GENERAL (ENVIRONMENTAL) SPECIFICATIONS
SPECIFICATIONS RATING/DESCRIPTION CONDITION
Temperature 0 to +50°C Full rated load operating
Vibration 10mm double amplitude 3-axes, non-operating 5 -10 Hz
-20 to +85°C storage
2g 3-axes, non-operating 10-55 Hz
Cooling Two internal fans Exhaust to the rear
Humidity 0 to 95% RH Non-condensing
Shock 20g, 11msec ±50% half sine Non-operating
Altitude Sea level to 10,000 ft.
For full specs, visit our Web site at
www.kepcopower.com/bophi.htm
• Full 4-quadrant, 1000 watt, source-sink operation.
• Energy recuperation, during sink-mode, through a patented
bi-directional PFC circuit.
• Meets the EN61000-3-2 harmonic limits. A built-in EN55011
Class A input EMI filter is provided.
• High efficiency switch-mode operation.
• Output voltage from ±6V to ±100V.
• Full digital control with built-in standard GPIB. Compatible
with IEEE 488.2. Accepts standard SCPI commands.
VISA driver provided. Also supports RS 232 bus.
• Large graphic LCD, displays settings and output voltage
and current.
• Keypad control from front panel with menu to access functions.
• Calibration adjustments are made via the remote interface
or locally from the keypad and are stored in non-volatile
memory. Calibration is password protected.
• CE; Complies with the requirements of the Low Voltage
Directive 73/23/EEC, the Marking and Declaration
Directive 93/28/EEC, and the EMC Directive 89/336/EEC.
• Built-in complex waveform generator.
• Parallel (max. 5 units) or Serial (max. 3 units) connection of
identical units. Parallel and Series connecting cables are
required; contact factory for pricing.
3