B&K Precision 1762 - Manual User Manual
Page 9
9
SPECIFICATIONS
NOTE: Specifications and information are subject to change without notice. Please visor the most current product
information.
Note 1:
Important: Even with noticeable Thermal Drift, this high resolution power supply will be considerably more accurate than any standard three
digit display bench power supply.
Thermal Drift: Since this power supply has greater resolution than standard bench power supplies they are more susceptible to Thermal
Drift. Thermal Drift occurs on almost every type of power supply but is more apparent on high resolution types. Thermal Drift results in the
metering of the power supply to either slowly increase or decrease with the change in the power supply’s internal temperature. As the power
supply outputs more power its internal temperature will increase causing the metering (primarily the current) to slowly increase. As the power
demand is deceased the power supply will cool causing the metering (primarily the current) to slowly decrease. If the power supply remains
with a constant output of power for more than fifteen minutes the power supply metering will remain constant and should not continue to
drift.
GENERAL
Power Requirements:
Domestic: 120 VAC + 10%, 60 Hz
International: 120/220/230/240 VAC -* 10%, 50/60 Hz
Power Consumption (Fully Loaded):
Approximately 350 W
Protection:
Reverse polarity protection and current limiting.
Dimensions (H x W x D):
5.7" x 10.5" x 15" (145 mm x 267 mm x 381 mm)
Weight:
10 kg (21 lbs)
Accessories Supplied:
Two earth ground bus straps.