B&K Precision 1796 - Manual - Manual (Page 7)

3.8 INPUT TAP SELECTION FOR 230V OPERATION :
In case of 230V operation please ensure the shorting links on the Tap Selection
boards are changed to 230V marked on the PCB for both Mains Transformer &
Auxulary Transformer as per the following diagram.
TAP SELECTOR BOARD
Please make sure the input varistor is replaced by 20D 361K or equivalent for
230V Mains Operation at the Input of EMI Filter located at bottom side of the unit.
3.9 REPACKAGING FOR SHIPMENT :
To ensure safe shipment of the power supply 1796 unit, it is recommended that
the package designed for the unit be used. The original packaging material is
reusable. Be sure to attach a tag to the unit specifying the owner, and the fault
observed with a brief description.
4