B&K Precision 879B - Manual - Manual (Page 31)

29
Disable Static Recording
To exit this mode, press and hold the button for two
seconds. The “ MAX AVG MIN”, “MAX”, “MIN”, or “AVG”
indicator will disappear on screen.
Note: Changing the primary function, secondary function,
or test frequency will automatically turn off static recording.
L/C/R/Z Select Mode
The primary display of the LCR meter is used to
indicate measured values under four different modes
(three modes for model 878B, which excludes Z
(impedance) measurements). These modes are:
L (inductance), C (capacitance), R (resistance), and Z
(impedance).
To change between these four primary modes of
measurement, press the (or for model
878B) button. The modes will change and repeat
upon each button press. On the screen, the indicators
“ L”, “C”, “R”, or “Z” (model 879B only) will be
displayed to indicate which mode the meter is in.