Brickcom OSD-200 20xp - Manual (Page 31)

27
Furthermore, after clicking the <Control Panel> Button, the Control Panel will be
shown as the figure below.
Pan & Tilt Direction Control- The <Pan and Tilt Direction
Control> on the Control Panel allows users to control the
Camera with browser viewers other than IE.
Iris Control (Auto Iris / Iris+ / Iris-) - Click on the buttons
(Auto Iris / Iris+ / Iris-) to adjust the Iris parameters.
Zoom (Zoom In/ Zoom Out) - Click on the buttons to zoom
in or zoom out.
Focus (Auto Focus / Focus Near / Focus Far) - Click on the
buttons to adjust the focus as near, far or automatic.
e. Run Preset / Cruise / Sequence
After setup the Preset / Cruise / Sequence lines according to PTZ Settings , select
a Preset / Cruise / Sequence line and start it by clicking on the <Run> button
( / / ).
f. PT Speed (1~10)
Set a number between 1 and 10 as the PT Speed every time users pan or tilt the
Camera via the Pan & Tilt Direction Control Panel. 1 is the slowest, 10 is the
fastest.
g. Set Center Mode
Right click on the Live Video Pane and select <Set Center Mode>. Then users
can position the interest area in the center of the Live Video Pane automatically
by clicking on the point of interest. In <Set Center Mode>, right click on the Live