Brickcom OSD-200 20xp - Manual (Page 32)

28
Video Pane again and select <Set Emulated Joystick Mode> to return to control
the Camera direction by left clicking and dragging the pointer on the Live
Video Pane.
Chapter 7 - System
Under the tab <System>, there are categories as the table below:
System
System
Security
Network
DDNS
Mail
FTP
HTTP
Application
Motion Detection
Network Failure Detection
Storage Management
Recording
Schedule
File Location
View Information
Factory Default
Software Version
Software Upgrade
Maintenance
NOTE- The System configuration page is only accessible by the
Administrator.
7.1 System
The System Setting can be found under the path: System> System.
A. Host Name
The name is for camera identification. If alarm function is enabled and is set
to send alarm message by Mail / FTP, the host name entered here will
display in the alarm message.
B. Time Zone
Select the time zone from the drop-down menu.
C. Enable Daylight Saving Time