Brickcom OSD-200 20xp - Manual (Page 35)

31
C. Manage User
a. Delete user
To delete a user, select the user name that is wished like to delete
from the drop-down user list and then click on <Delete> to remove it.
b. Edit user
Select a user name from the drop-down user list and click on <Edit> to
edit the user’s password and privilege.
NOTE- It is required to enter the User password as well as select
the function open to the user. When finished, click on <Save> to
modify the account authority.
7.2.2 HTTPS
The HTTPS setting can be found under this path: System> Security>
HTTPS.
<HTTPS> allows secure connections between the IP Camera and web
browser using <Secure Socket Layer (SSL)> or <Transport Layer
Security (TLS)>, which ensure camera settings or Username / Password
info from snooping. It is required to install a self-signed certificate or a
CA-signed certificate for implementing <HTTPS>.
To use HTTPS on the IP Camera, a HTTPS certificate must be installed.
The HTTPS certificate can be obtained by either creating and sending a
certificate request to a Certificate Authority (CA) or creating a self-signed
HTTPS certificate, as described below.
A. Create Self-signed Certificate
Before a CA-issued certificate is obtained, users can create and install
a self-signed certificate first.
Click on <Create> button unde
r “Create self-signed certificate” and
provide the requested information to install a self-signed certificate for
the IP Camera. Please refer to the last part of this section: Provide the
Certificate Information for more details.
NOTE- The self-signed certificate does not provide the same high
level of security as when using a CA-issued certificate.