Brickcom Software Users Manual For Firmware release V3.2.x.x - Manual (Page 25)

24
Privacy Mask
Add / Edit Privacy mask A privacy mask can be created to conceal areas within the
camera’s view. The Privacy Mask List displays all the masks that are currently
configured for the network camera and if they are enabled.
NOTE – A total of sixteen privacy masks can be created.
To create a new privacy mask:
a. Use the Pan, Tilt and Zoom (PTZ) controls or select Preset Point from the
drop-down menu to steer the camera view to the required position.
b. Click on Add. A rectangle will appear on the center of the viewing window.
c. Use the mouse to resize the privacy mask window.
d. Enter a descriptive name in Mask name, choose a color from the Privacy mask
color drop-down menu and click Apply.
To edit a privacy mask, select the mask and reshape, move or change the color as
needed.