Brickcom Software Users Manual For Firmware release V3.2.x.x User Manual
Page 49
- 48 -
6. The chart below the Live View window indicates the activity level of the Motion
Detection window. When motion is detected by the camera and exceeds the defined
threshold, a red bar will appear. Users can use this feature as a trigger source to send
photos or videos to a remote server via email or FTP.
Click Apply to apply settings or Cancel to cancel changes.
PIR
The PIR (Passive InfraRed) sensor measures infrared light radiating from objects in its field of
view. This can be used to detect a moving object, such as a person, in dimly lit areas.
Sensitivity
– Adjust the sensitivity of the PIR Sensor from the drop down menu. The sensitivity
can be set from 10 - 100%; with the default sensitivity set at 50%. Higher sensitivity levels will
increase the range of the PIR Sensor. When the sensitivity level is set to 100%, the PIR
sensor will be able to detect moving objects within six meters.