Daymak Boomerbuggy IV - Manual (Page 17)

Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Seat Removal Nut
The seat removal nut is located on the shaft holding the seat, next to the swivel
adjustment lever. This is a grub screw that engages a groove on the shaft that the
seat is mounted on. By loosening or removing this nut, you will be able to remove
the seat. Upon reinstallation, pay extra attention to ensure that the nut is secured
and in place.
Seat Removal
After you have removed the seat removal nut, the seat can be easily removed by
lifting the chair off of the shaft it rests on.
The Boomerbuggy series was designed to be easily dismantled for efficient
transportation and storage. Disassembling the scooter requires very little time
and effort. Simply follow these steps to disassemble your scooter.
Disassembling the Scooter for Transport or Storage
• First remove the seat. You can do so by loosening the swivel lever and
removing the grub nut that holds the seat to the shaft. Please refer to
the Seat Removal for more information.
• With the seat removed, release the tiller lever and fold the tiller all the
way down to where the seat used to be.
IMPORTANT! While disassembled, the scooter is still considerably heavy due to
the batteries and motor. When transporting the scooter, always have someone
around to assist you!