Daymak Boomerbuggy IV - Manual (Page 8)

Daymak Inc. · 130 Oakdale Rd · Toronto, ON · 416-749-2324 · 1-866-379-7779 · www.daymak.com
Speed Controls
You can adjust the speed of your scooter by turning the speed adjustment knob.
The lowest setting is set by turning the knob fully counter-clockwise and the
highest setting is set by turning the knob fully clockwise.
Charge Indicator
The number of LED bars lit indicates the amount of charge left. The true charge
level will show only when the bike is in operation.
CAUTION! Do not allow the battery to completely deplete! For optimal battery
maintenance, charge your batteries once they are at approximately 20%!
Light Switch
The switch turns on or off the headlights and taillights, if applicable. I is the on
position and O is the off position.
Horn
The horn button is located on the tiller, facing the operator. Pressing the horn
button operates it.
Indicator Switch
The indicator switch will engage the indicators respective to the position the
switch is set. Pressing up (labeled
◄) will engage the left indicator and pressing
down (labeled
►) will engage the right indicator.
Charging Port
Turn the cover and the charging port will be exposed. Align the charging plug’s
pins with the charging port’s holes and insert the gently insert the charger.
IMPORTANT! When charging your scooter, always make sure that you plug the
charger into the scooter before plugging the charger into the wall! Failure to do
so can potentially damage the scooter.