MoTeC ADL2 EDL2 - Manual (Page 5)

MoTeC Overview 3
Additional CAN Templates
The ADL2 provides ten additional CAN templates.
Independent Speed Inputs
All four speed inputs may be independently designated as hall or magnetic
(rather than in pairs).
More User Tables
The ADL2 has sixteen 2D tables and sixteen 3D tables.
Increased Processing Performance
The ADL2 has increased processing performance to handle more demanding
applications.
ADL Pin Compatibility
An ADL2 may be connected to an existing ADL wiring loom and will
communicate using the existing CAN communications if required or USB
communications can be added.
The ADL2 is directly pin compatible with the ADL except that pin 78 (RS232
TX) is used for USB. RS232 TX is still available but is shared with pin 67
(Telem).