MoTeC BRX - Manual (Page 17)

MoTeC Trouble Shooting 15
Trouble Shooting
Check List : Basic Operation
To confirm basic operation of the beacon, check the following :
1. Check the Transmitter LED
Green
OK
Orange
The battery voltage is less than 10.5 Volts, the battery requires
charging.
Red
• If the battery voltage is less than 10.5 Volts charge the battery.
• If the battery voltage is greater than 10.5 Volts, return the unit to
MoTeC for servicing.
LED Off
Check that the battery is connected correctly, Red to Positive, Black to
Negative and that the battery is supplying at least 10.5 volts.
2. Check the Receiver LED
Aim the Transmitter at the Receiver and check the LED:
LED Bright
OK
Dim LED
If the LED glows dimly then check that the ID number is set correctly in
both the Transmitter and the Receiver and that the power has been
switched off and on since the numbers were changed. Be careful that