MoTeC GPS-G1 - Manual (Page 7)

MoTeC Specifications 5
Specifications
Electrical
Power Supply Voltage 4.0 to 5.5 V
Power Supply Current 65 mA
Connections
Mating Connector Deutsch DTM06-4S
Pin Name Description
1 Bat - Connect to Battery Negative on the logging device
2 TX Connect to RX pin on logging device
3 RX Don't connect (This pin is only used for programming)
4 5V Connect to 5 V sensor supply on the logging device
Data
Output Type RS232
Output Levels 0 V / 5 V (nominal)
Baud Rate GPS-G1 19200 (MoTeC default)
Baud Rate GPS-G1(T) 38400
NMEA Sentences
RMC, GGA (MoTeC default)
Physical
Antenna Built into GPS unit
Size 61 mm diameter x 19.5 mm (2.4" diameter x 0.77")
Weight 170 g (6.0 oz)
Cable length 4.5 m (15 ft)
Operating Temp -30
°C to +80 °C (-22 F to 176 F)
Mounting Magnetic base + M3 centre thread
GPS Performance
Update Rate 5 Hz
Satellite Channels 12
Reacquisition Time < 2 secs
Hot Start Time 15 seconds
Warm Start Time 45 seconds
Cold Start Time 5 minutes
Dynamics >4G